Annual Inspection (gas fryers only)

 

 

 

Annually

 

 

 

FR 3 A2-T

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Why

Frymaster recommends that a Factory Authorized Service Technician inspect this appliance at least

 

 

annually. This will help ensure the equipment is in safe working order and operating at peak per-

 

Time required

formance.

 

 

 

 

 

 

 

 

 

1.5 hours to complete

 

 

 

 

 

 

 

 

 

Time of day

The inspection should be scheduled by the store to ensure business is not interrupted and to give

the servicer adequate access to the equipment.

Hazard icons

Tools and supplies

Tools supplied by technician

Frymaster Fryer Model BIGLA30 – LOV

Procedure

QUALIFIED TECHNICIANS ONLY

1Cabinet inspection

Inspect the cabinet, inside and out, front and rear, for excessive oil buildup.

2Check regulated gas pressure.

Contact the local gas company or a service agency to check the gas pressure out of the fryer’s gas regulator.

For natural gas, the pressure must be 3.0 in. W.C.

(76 mm W.C.) For propane gas, the pressure must be 8.25 in. W.C. (210 mm W.C.)

If the pressure does not meet these standards, ask the service agency or gas company to adjust the pressure to meet the standard.

3Probe check

Verify that the temperature and high-limit probes are properly connected, tightened and functioning properly, and that mounting hardware and probe guards are present and properly installed.

4Clean and Replace gas valve vent tube.

Clean and replace the gas valve vent tube. Follow the cleaning procedure in the service manual.

5Clean combustion air blower.

Clean the combustion air blowers. Follow the cleaning procedure in the service manual.

6Check fryer recovery time.

Choose a vat on the fryer. Check the fryer’s most re- cent recovery time for that vat, using the procedure in FR3 M1. The most recent recovery time should be less than 2:25 (two minutes, twenty-five seconds).

If the fryer’s recovery time is less than 2:25 (two mi- nutes, twenty-five seconds).the procedure is complete for this vat. Go to step 9.

7Check combustion.

If the fryer’s recovery time is less than 2:25 (two mi- nutes, twenty-five seconds).skip this step.

Connect the multimeter in series with the white flame sensor wire on the igniter. Allow the burner to operate for at least one minute after the melt cycle is com- pleted. After 1 minute, the reading on the multimeter should between 2.5 and 3.5 microamps. Any other reading is not acceptable.

After 90 seconds of continuous operation, check the color of the burner. The burner should glow bright orange-red. Use the Burner Color Comparison Chart inside the door of the fryer to identify the correct color. A blue flame or dark spots on the burner face are not acceptable.

QUALIFIED TECHNICIANS ONLY Annually FR 3 A2-T

©McDonald’s Corporation · Planned Maintenance Manual · Revised June 2009

Page 1 of 1

Page 24 Page 26
Page 25
Image 25
Frymaster BIGLA30, BIELA14 manual FR 3 A2-T, Check regulated gas pressure, Check combustion
Page 24 Page 26

BIGLA30, BIELA14 specifications

The Frymaster BIGLA30 is a state-of-the-art commercial frying solution designed to meet the high demands of busy food service environments. Known for its energy efficiency, reliability, and advanced technology, the BIGLA30 has become a favorite among restaurateurs and catering businesses.

One of the standout features of the BIGLA30 is its large capacity. With a significant oil capacity, it allows for frying large quantities of food simultaneously, making it ideal for high-volume establishments. This capacity enables kitchens to keep up with demand during peak hours, ensuring that orders are fulfilled quickly and efficiently.

The Frymaster BIGLA30 is equipped with advanced digital controls that simplify the frying process. The intuitive interface allows operators to easily adjust cooking times and temperatures, ensuring consistent results. The digital controls are also equipped with a filtration system that automatically cleans the oil, which prolongs its life and ensures the food maintains optimal flavor.

Another prominent feature of the BIGLA30 is its energy-efficient design. It utilizes innovative heating technology that reduces energy consumption while providing high-performance frying. This not only helps to lower operational costs but also supports environmentally friendly practices within the kitchen.

Safety is paramount in any commercial kitchen, and the BIGLA30 excels in this area. It is designed with safety mechanisms such as automatic shut-off and temperature control systems to prevent overheating. Additionally, the unit features large, easy-to-grip handles on pots, allowing for safe handling and transfer of food items.

In terms of construction, the Frymaster BIGLA30 is built with high-quality materials that ensure durability and longevity. The robust design can withstand the rigors of a busy kitchen and is easy to maintain, reducing downtime and service costs. Its sleek stainless-steel exterior not only presents a professional aesthetic but is also simple to clean, contributing to overall kitchen hygiene.

Furthermore, the BIGLA30 is compatible with various cooking applications, making it versatile enough to fry a wide range of items from crispy fries to delicious chicken. This adaptability makes it a valuable addition to any food service operation.

In summary, the Frymaster BIGLA30 is a top-tier frying solution that combines capacity, energy efficiency, advanced technology, and safety features. Its ability to deliver consistent results while minimizing costs makes it an essential tool for any commercial kitchen.
Top Page Image Contents