Frymaster BIGLA30 warranty Shutdown, For short-term shut down during the workday, Operation

Models: BIGLA30

1 86
Download 86 pages 17.38 Kb
Page 22
Image 22
3.1.3Shutdown

adjust the position of the plate to open or close the air intake opening until a bright orange-red glow is obtained. Carefully hold the plate in position and tighten the locking nut.

3.1.3Shutdown

For short-term shut down during the workday:

1. Place the computer ON/OFF switch in the OFF position and put the frypot covers in place.

When shutting the fryers down at closing time:

1. Place the computer ON/OFF switch in the OFF position to turn the fryer off.

For CE Fryers

For Non-CE Fryers

Placing the ON/OFF switch in the OFF position also turns off the gas valve.

After placing the ON/OFF switch in the OFF position, turn the gas valve knob to the OFF position.

Honeywell

ON

OFF

Honeywell

ON

OFF

2.Filter the oil and clean the fryers (See Chapters 5 and 6).

3.Place the frypot covers on the frypots.

3.2Operation

This fryer is equipped with M3000 computers (illustrated below). Refer to the M3000 Computer Operating Instructions in Chapter 4 for the computer programming and operating procedures.

M3000 COMPUTER

Refer to Chapter 5 of this manual for operating instructions for the built-in filtration system.

3-4

Page 22
Image 22
Frymaster BIGLA30 Shutdown, For short-term shut down during the workday, When shutting the fryers down at closing time