Programming Hint
Vats cooking french fries and other
*If you plan to use the cooking alarms or exit modes features, please skip to sections 5 and 6 for instruction on their programming.
If not, programming can continue in the sequence at right.
Programming for non-Segmented Cooking
(Filtering Mode)
1.Establish the number of cook cycles before the computer prompts a filter cycle.
2.Press 
, the ON/OFF button to turn the computer off.
3.Display shows OFF.
4.Press hidden programming key in Frymaster logo. (See diagram).
5.Display show CODE on left side.
6.Enter 1658 using numbered product keys 
.
7.GBL Filt appears in the left display; 0 or a previously programmed number appears in the right.
8.Use the product keys to enter the amount of product to be cooked before the computer calls for filtering.
9.Press 
. Computer displays OFF.
10.Press 
, the ON/OFF button to turn computer off.
11.Display shows OFF.
12.Press hidden programming button in Frymaster logo. (See diagram).
13.CODE appears on left side; right side is blank.
14.Enter 1650 using numbered product keys. 
Use button 10 for 0.
15.Product shows in left display. All product buttons blink. Right display is blank.
16.Press the product button 
you want to program. Heads appears in left display; a number appears in the right. The LED in the chosen button remains lit. All others go off.
17.Use the product buttons to enter the amount of product to be cooked with the button being programmed.
18.Press 
to lock in choice.
19.*Segment appears in left display, PROD and the number of the button being programmed appears in the right. The LED in product button 1 begins to flash.*
20.Press product button 1 
. The LED in product 1 continues to flash; the LED in the button being programmed stays on continuously.
21.Cooktime appears in left display; 0 or a time programmed previously appears in right display.
22.Use the product buttons to enter the cooking time.
