*If you plan to use the cooking alarms or exit modes features, please skip to sections 5 and 6 for instruction on their programming.
If not, programming can continue in the sequence at right.
**The temperature display can be toggled from Fahrenheit to Celsius in this step. See instructions on Page
13.Enter 1650 using numbered product keys. 
Use button 10 for 0.
14.Product shows in left display. All product buttons blink. Right display is blank.
15.Press the product button 
you want to program. Heads appears in left display; 0 or a previously programmed number in the right. The LED in the chosen button remains lit. All others go off.
16.Use the product buttons to enter the number of heads of chicken (or equivalent) to be cooked in each cycle of the product button being programmed.
17.Press 
to lock in choice.
18.Segment appears in left display, PROD and number of the product button being programmed appears in right.
19.Press product button 1 
. The LED in product 1 continues to flash; the LED in the button being programmed stays on continuously (unless button 1, which is flashing, is being programmed).
20.Cooktime appears in left display; a time programmed previously appears in right display.
21.Use the product buttons to enter 0, which eliminates any earlier programming.
22.Press 
.
23.Segment appears in the left display; Prod 1 in the right. No button LEDs are illuminated.
24.Press button 1 
. The LED flashes.
25.Cooktime appears in left display; 0 appears in right display.
26.Use the product buttons to enter the total cooktime.
27.Press 
.
28.
29.Use product keys to enter the cooking temperature for the initial setpoint of the cooking cycle.
30.Press 
to lock in temperature.
31.Sens appears in the left display; 0 appears in the right.
32.Use product buttons to set sensitivity, which is the degree the computer reacts to the introduction of cold product to the heated oil. The computer can stretch or shrink the cooking time. Zero, or no sensitivity, is a common choice for
