10.Segment appears in left display, PROD and number of the product button being programmed appears in right.
11.Press product button 1 
. The LED in product 1 continues to flash; the LED in the button being programmed stays on continuously (unless button 1, which is flashing, is being programmed).
12.Cooktime appears in left display; a time programmed previously appears in right display.
13.Use the product buttons to enter 0, which eliminates any earlier programming.
14.Press 
.
15.Segment appears in the left display; Prod 1 in the right. No button LEDs are illuminated.
16.Press button 1 
. The LED flashes.
17.Cooktime appears in left display; 0 appears in right display.
18.Use the product buttons to enter the total cooktime.
19.Press 
.
20.
21.Use product keys to enter the cooking temperature for the initial setpoint of the cooking cycle.
22.Press 
to lock in temperature.
23.Sens appears in the left display; 0 appears in the right.
24.Use product buttons to set sensitivity, which is the degree the computer reacts to the introduction of cold product to the heated oil. The computer can stretch or shrink the cooking time. Zero, or no sensitivity, is a common choice for
25.Press 
to lock in choice.
26.Segment appears in left display; Prod 1 in right.
27.Press product button 2 
. The LED in product button 2 flashes. The LED in the button being programmed is illuminated continuously.
28.Determine the desired cooktime for the first cook cycle. Subtract that number from the total cooktime entered in the first step. Enter the result with the product buttons. See calculation at right and graphic in programming overview on page
29.Press 
to lock in choice.
