Frymaster cm45 s operation manual Toggle from Fahrenheit to Celsius, Programming Hint

Programming Hint

The temperature display on the CM4-S can be changed from Fahrenheit to Celsius during the regular programming process. An abbreviated programming sequence is shown at right to address Fahrenheit-to- Celsius adjustment exclusively.

Toggle from Fahrenheit to Celsius

1.Press , the ON/OFF button to turn computer off.

2.Display shows OFF.

3.Press hidden programming button in Frymaster logo. (See diagram page 2-2).

4.Display shows CODE on left side.

5.Enter 1650 using numbered product keys. Use button 10 for 0.

6.Product shows in left display. All product buttons blink. Right display is blank.

7.Press a product button . Heads appears in left display; 0 in the right. The LED in the chosen button remains lit. All others go off.

8.Press to step to next choice.

9.Segment appears in left display, PROD 1 in right. The LED in the 1 product button begins to flash.

10.Press product button 1 . The LED in product 1 continues to flash.

11.Cooktime appears in left display; 0 or a time programmed previously appears in right display.

12.Press to step to next choice .

13.Set-Tempappears in left display; a temperature in Fahrenheit or Celsius appears in the right display.

14.Press to toggle between choices.

15.With desired choice displayed, press .

16.Sens appears in left display; right is blank.

17.Press .

18.Segment appears in left display; Prod appears in right.

19.Press .

20.Display shows product on left; right is blank. All LEDs flash.

21.Press to turn computer off.

7-1