Frymaster cm45 s operation manual CM4-SCooking Computer - Overview

CM4-S Cooking Computer — Overview

The CM4-S has a number of features and it is not essential to use all of them in your cooking operation. Programming for segmented cooking and staggered alarms, which are not essential to use together, are extensive processes.

For that reason, programming for filtering prompts and alarms are

The CM4-S can cook in segmented and non-segmented cook cycles with or without automatic filter prompts. It is also programmable to exit a cook cycle in one of three modes: return to setpoint, assume an idle temperature, well below setpoint, or prompt filtering at a prescribed cook cycle count for a specific product button

The CM4-S is also capable of monitoring cook cycles initiated by all the product buttons and call for filtering when the cumulative amount reaches a number set by the operator.

Programming for filtering and exit-mode options are not essential to basic cooking programming. For that reason, filtering and exit mode instructions are provided in separate sections of this manual.

The sequence in which programmableEncounteredfeaturesin all programming;are encountereda product after

Product button must be pressed for programming.

entering the proper access code is listed below with a brief explanation of their function.

presented in separate chapters.

Heads

Segment

Alarm

Exit

cooktime

Set-temp

sens

Encountered in all programming; allows computer to keep running total of heads of chicken or equivalent. The amount is accessible with a programming code.

Encountered in all programming; used to program segmented and non-segmented cook cycles.

Allows up to three alarms to be set per cook cycle; encountered by pressing special programming key.

Allows programming of the exit mode at the completion of a cook cycle; encountered by pressing special programming key.

Encountered in all programming; used to enter cooking times for segmented and non-segmented cooking cycles.

Encountered in all programming; used to enter cooking temperatures for segmented and non-segmented cooking cycles.

Encountered in all programming; used to enter sensitivity, which is the degree the computer reacts to the introduction of cold product to the heated oil. The computer shrinks or stretches the cooktime based on the degree of cooling and the sensitivity setting. A 0 setting results in no reaction; 9 produces the greatest reaction.

1-2