Other Suspend/Resume Issues
Other issues you should consider when suspending or resuming system operation include the following:
•Your system may be configured to suspend operation automatically after a period of inactivity. Also, your system can be configured to resume operation automatically at a given time or when the optional modem detects a ring on the phone line.
•The system uses a small amount of battery power when in Suspend mode. Eventually, the battery will become fully discharged. (A fully charged battery pack can power the system in Suspend mode for about 10 days.) If you will not be using the system for an extended period of time, shut down the system rather than using Suspend mode.
•If the battery pack charge drops to the
•If the system is running (or in Suspend mode) when the battery pack charge drops to the Critically Low level, the system is forced into Suspend mode and cannot be resumed until external power is connected or a charged battery pack is installed. If this occurs, install a charged battery pack or connect an external power source such as the AC adapter.
•Suspending system operation interrupts data communications; however, some programs may block the system from suspending to prevent an interruption.
•The Suspend/Resume button on your system may be disabled. If this is the case, pressing the Suspend/Resume button will not suspend system operation as described here.
•If your system is equipped with a wireless LAN adapter, you may be logged off the network after a period of inactivity while system operation is suspended. Contact your network administrator or local help desk for details on
•Your system may be configured to resume when activity is detected on the serial port or when a ring is detected on the modem line.
Other Suspend/Resume Issues |
