Infrared Data Transfer Is Not Working
If you are experiencing problems transferring data over the pen tablet’s infrared interface (IrDA port), check the following:
•Can the IrDA port on the pen tablet “see” the IrDA port on the other device? There must be a direct
•Ensure that you are pointing the IrDA port on the pen tablet at the port on the other device. The “viewing angle” from the IrDA port on the pen tablet must not be more than 15 degrees from center.
•Ensure that the pen tablet is close enough to the other device. The distance between the two devices must be no more than approximately 3 feet (1 meter).
•The device that you are trying to communicate with must be compliant with the IrDA Standard Revision 1.1 or lower. If you are unsure, contact your local help desk.
•Your system must be properly configured before the IrDA port can be used. Contact your local help desk for assistance if necessary.
Troubleshooting
