2.Slide the battery latch on the battery pack currently installed in the pen tablet to the open position as shown in Figure
Battery Pack
Slide battery pack
out to remove.
Slide latch to open.
Battery Latch
Figure 2-2 Removing the Battery Pack
3.Slide the battery pack out of the pen tablet.
You can now install a charged battery pack in the pen tablet and charge the battery pack that you removed in an external battery charger if one is available. See the instructions that came with your external battery charger for details.
4.To install a battery pack in the pen tablet, slide the latch on the battery pack to the open position.
5.Slide the battery pack into the pen tablet until it fits snugly. Slide the latch to the closed position to latch the battery pack in place.
You can now start or resume the system and use the pen tablet.
Conserving Battery Power
A fully charged battery pack can power the Point 1600 pen tablet for about 4 hours under typical use (with power management). Your results may vary depending on how the pen tablet is configured. You can extend the life of your battery pack by conserving battery power.
Conserving Battery Power |
