System Will Not Respond
If the system will not respond to user input or appears to be “hung”, you can turn off the system by pressing the Reset button. You can then start the system by pressing the Suspend/Resume button. The location of the Reset button is shown on page
Caution
Active data will be lost if you press the Reset button. If your system hangs frequently, there may be problems with your operating system configuration or pen tablet hardware.
Contact your local help desk for further assistance if necessary.
Display Screen Is Blank or Difficult to Read
If the display screen is blank or difficult to read, try adjusting the display screen settings. See “Using Hotpads” on page
•If the display screen is blank, confirm that the pen tablet is running (the Power LED is on continuously).
•The display contrast setting may be set to extreme high or low levels, causing the screen to appear blank. Try adjusting the contrast using the hotpads.
•The ambient temperature can affect the display contrast. You may need to adjust the display contrast periodically, using the hotpads, to compensate for changes in temperature.
•The pen tablet might be set up to use an external monitor. Tap the Display Select Hotpad to determine if the pen tablet display screen is selected.
•The video timeout may have expired. To conserve power, the system may be configured to turn off the display screen after a period of time. Tap the screen to activate the display.
Care, Maintenance, and Troubleshooting |
