Fujitsu BX600 SB9 manual Verify the Vlan trunk, Gvrp

White Paper ⏐ Issue: October 2006 ⏐ Integration of BX600 SB9 Switches in Cisco Networks Page 10 / 47

switchport allowed vlan 1,10,20

!

interface range GigabitEthernet0/1 - 2

!the native vlan 1 is default and normally not displayed in configuration switchport trunk native vlan 1

switchport trunk allowed vlan 1,10,20 switchport trunk encapsulation dot1q switchport mode trunk channel-group 6 mode on

!

Step 4: Verify the VLAN trunk

! SB9

(bx6-sb9-a) #show vlan

VLAN ID VLAN Name		VLAN Type	Interface(s)
------- ----------------------------- ---------- -------------------------
1	Default	Default	0/4,0/5,0/6,0/7,0/8,0/9,
			0/10,0/11,0/12,0/13,0/15,0/16,
10	VLAN-10	Static	1/1,1/2
			0/1,0/11,0/12,0/13,0/14,0/15,
20	VLAN-20	Static	0/16,1/1,1/2
			0/2,0/11,0/12,0/13,0/14,0/15,
			0/16,1/1,1/2

(bx6-sb9-a) #show		interface switchport 1/1
	Port	Acceptable	Ingress	GVRP	Default
Interface VLAN ID		Frame Types	Filtering		Priority
--------- -------		------------ ----------- ------- --------
1/1	1	Admit All	Disable	Disable	0
(bx6-sb9-a) #
! Cisco-A
Cisco-A# show interface trunk
Port	Mode	Encapsulation		Status	Native vlan
Po1	on	802.1q		trunking	1
Port	Vlans allowed on trunk
Po1	1,10,20
Port	Vlans allowed and active in management domain
Po1	1,10,20
Port	Vlans in spanning tree forwarding state and not pruned
Po1	1,10,20