Fujitsu BX600 SB9 manual Verify the configuration, Stp

White Paper ⏐ Issue: October 2006 ⏐ Integration of BX600 SB9 Switches in Cisco Networks Page 18 / 47

switchport mode trunk channel-group 2 mode on

interface GigabitEthernet0/23 switchport trunk encapsulation dot1q switchport mode trunk channel-group 3 mode on

!

interface GigabitEthernet0/24 switchport trunk encapsulation dot1q switchport mode trunk channel-group 3 mode on

Step 2: Verify the configuration

!Check if STP is diabled @ SB9

(bx6-sb9-a) #show spanning-tree summary

Spanning Tree Adminmode	Disabled
Spanning Tree Version	IEEE 802.1d
Configuration Name	Default
Configuration Revision Level	0
Configuration Digest Key	0xac36177f50283cd4b83821d8ab26de62
Configuration Format Selector	0
No MST instances to display.

!Check port-channel configuration (bx6-sb9-a) #show port-channel all

Log.	Port-	Link	STP	Mbr	Port	Port
	Channel	Adm. Trap
Intf	Name	Link Mode Mode	Mode	Type Ports	Speed	Active

------ --------------- ------ ---- ---- ------ ------- ------ --------- ------

1/1	Po1	Up	En.	En.	En.	Static	0/11	Auto	True
1/2	Po2	Up	En.	En.	En.	Static	0/12	Auto	True
							0/13	Auto	True
							0/14	Auto	True
! Check the VLAN configuration
(bx6-sb9-a) #show vlan
VLAN ID VLAN Name					VLAN Type		Interface(s)

-------	-------------------------------- ---------- -------------------------
1	Default	Default	0/4,0/5,0/6,0/10,0/15,
10	VLAN-10	Static	0/16,1/1,1/2
			0/1,0/15,0/16,1/1,1/2
20	VLAN-20	Static	0/2,0/15,0/16,1/1,1/2
(bx6-sb9-a) #

!Check if RSTP state at Cisco Switch A

Cisco-A#show spanning-tree

VLAN0001
Spanning tree enabled protocol rstp
Root ID	Priority	1
	Address	0017.9470.3200
	This bridge is the root				Forward Delay	8 sec
	Hello Time	1	sec	Max Age 11 sec
Bridge ID	Priority	1	(priority 0 sys-id-ext 1)
	Address	0017.9470.3200			Forward Delay	8 sec
	Hello Time	1	sec	Max Age 11 sec

	Aging Time 300
Interface	Role Sts Cost	Prio.Nbr Type
----------------	---- --- ---------	-------- --------------------------------