Fujitsu BX600 SB9 manual Configure the Broadcom NIC

White Paper ⏐ Issue: October 2006 ⏐ Integration of BX600 SB9 Switches in Cisco Networks Page 26 / 47

switchport allowed vlan add 10

!Set the access VLAN as native VLAN switchport native vlan 10

exit

!This line is only needed if you are running STP on the switch spanning-tree edgeport

!Forbid all VLANs but the access VLAN

switchport forbidden vlan add 1 switchport forbidden vlan add 10

!Permit the access VLAN switchport allowed vlan add 20

!Set the access VLAN as native VLAN switchport native vlan 20

exit

Step 2: Configure the Broadcom NIC

To configure the Broadcom NIC, start the “Broadcom Advanced Control Suite 2”.

This is the main window of the “Broadcom

Advanced Control Suite 2”.

Select the menu item “Tools->Create a

Team”

Enter a name for the team and press “Next>”