Fujitsu BX600 SB9 manual Configure the SB9

White Paper ⏐ Issue: October 2006 ⏐ Integration of BX600 SB9 Switches in Cisco Networks Page 45 / 47

Step 2: Configure the SB9

!SB9 Configuration for TACACS+

!Create a authentication list

!authenticatio will be done agains TACACS, if the server

!does not respond, it will be done locally authentication login TACACS tacacs local reject

!bind the authentication list to all users, which are

!not locally.

username defaultlogin TACACS

!Enable TACACS Tacacs

!Set the shared key for server 1 tacacs key 1 0 fsc

!Set the IP address of server 1 tacacs server-ip 1 10.222.0.21

!Define the server 1 as master tacacs mode 1 master 1

!Since all users which are authenticated by TACACS+ are read-only

!user, it’s important to set the enable password which is not seen in

!the configuration file

enable passwd

Step 3: Test the login

C:\> telnet bx6-sb9-b

!Test a login with correct username but wrong password (bx6-sb9-b)

User:test-ro

Password: WRONG

!Test a login with correct username and password User:test-ro

Password:test-ro (bx6-sb9-b) >

At the ACS you can see the failed and successful attempts:

View the failed attempts