∙Description not specified.
Cause: | The description of the setting file has not been specified. |
User response: | Enter the description of the setting file in the description field. Then, |
| try scanning again. |
∙Filename not specified.
Cause: | The filename of the setting file has not been specified. |
User response: | Enter the filename of the setting file. Then, try scanning again. |
∙Specified string is too long.
Cause: | The specified string is too long. Up to 128 |
| to 64 |
User response: | User response: Reduce the number of characters in the string so that |
| they do not exceed 128 |
∙Cannot specify next words for filename. \:;?”<> .
Cause: | The specified filename contains one or more of the following |
| characters: \:;?”<> . |
User response: | Enter a file name that does not contain the above characters. Then, |
| make the settings again. |
∙The image scanner cannot be found.
Cause: | Possible causes include the following: an image scanner that is not |
| supported by this driver has been connected, no image scanner has |
| been connected, or the cable is not connected. |
| Otherwise, the initial values of the image scanner were overwritten |
| while the driver was open. |
User response: | Check the connection of the image scanner. Also be sure to close the |
| driver before using the initial value adjustment utility in the image |
| scanner. |
∙The specified image scanner is being used.
Cause: | The image scanner may be already in use by another application, or |
| the TWAIN driver may have been started twice. |
User response: | User response: After all applications are terminated, restart the image |
| scanner for scanning. |
64
