Note
The TWAIN specifications require that the data width be arranged in units of 32 bits. As a result, a difference of up to 31 dots can be included, depending on the value set.
Figure Option dialog (Endorser)
♦Enable Endorser
Specifies enabling or disabling the endorsement function of the device.
When the option is selected and scanning has been completed, the scanned originals are printed or a stamp is imprinted according to the instructions below. This applies only to stamp or endorser options. Therefore, the function is supported only in devices in which the stamp or endorser option can be installed. See "Relevant Image Scanner Specification" described in the Appendix.
♦Y Offset (Printing)
Specifies Y Offset from the edge of the original for the placement of printing. See "Relevant Image Scanner Specification" in the Appendix because the standard value specified here depends on the device.
28
