Product:
Type:
Image sensor:
Operating method:
Light source:
Basic resolution:
Output resolution:
Grayscale levels (internal):
Grayscale output:
Halftone Patterns:
Scanning speed:
ADF scanning speed 2:
ADF stacker capacity:
Document size: Supported regular paper 5:
Isolation specification:
Background compensation:
Contrast setting:
Gamma patterns:
Image processing function:
Interface:
Job control:
M3096GX1 (device name:
Desktop
Reduced optical system
Document fixed, scanner unit moving (flat bed),
Automatic Document Feed (ADF)
Xe discharge tube (Green)
Horizontal scanning: 400 dpi
Vertical scanning:400, 300, 240, 200 dpi
Standard: 400, 300, 240, 200 dpi
With image processing option: 50 dpi to 800 dpi (at steps of 1)
8 bit 256 levels
Enabled (8 bits)
Dither matrix (can be downloaded), Error diffusion
2.0 sec or less (A4, 200 dpi)
21 pages/minute (200 dpi, A4, 55 kg)
Maximum 50 sheets, (ream weight: 55 kg, A4 [High quality paper, Normal temperature and humidity])
Maximum 297 mm × 432 mm A3 or Double letter sized paper
A3, A4/A4 Landscape, A5/A5 Landscape, A6/A6 Landscape,B4, B5/B5 Landscape, B6/B6 Landscape, Letter, Letter Landscape, Legal, Double letter, US Executive/US Executive Landscape
Specified (one location)
Enabled
256 steps
3 internal types (can be downloaded)
Auto binary (simplified method) Image processing option installed
Outline emphasis, Outline extraction, Automatic separation, Mirror image, Reverse image, Automatic binarization, Smoothing, Filtering, Noise removal
SCSI-II
Enabled
Use of FUJITSU Scanner Control Center: Disabled
1.Use of this scanner may require installation of the optional image compression option board
2.This speed is only specified for the scanner itself. The actual reading speed may vary depending on the system
configuration.
5Not all paper sizes can be used in all devices. For details, refer to the users' manual for the device. For other paper sizes, the customer settings can be used.
74
