USING SETUP MODE

PRINTING A LIST OF

The LIST function prints a list of all the printer’s currently selected

SELECTED OPTIONS

options. This function is useful for checking the printer settings when

 

 

you first enter setup mode or just before you exit. To print a list of

 

 

options, load continuous forms paper and then proceed as follows:

 

 

1. Enter setup mode.

 

 

 

Press the −MICRO button and the ↓MICRO button simultane-

 

 

 

ously until the printer beeps. Wait for the printer to stop

 

 

 

printing and check that the following <<FUNCTION>> menu

 

 

 

is printed:

 

 

 

 

 

 

 

 

 

 

<<FUNCTION>>

SAVE&END

MENU1

MENU2

HARDWRE

ADJUST CONFIG DEFAULT

LIST

SELF-TST

HEX-DUMP

V-ALMNT

GAP-ADJ

 

 

 

 

 

2.Select the LIST function.

Repeatedly press the “←” or “→” button to position the red cursor on LIST. Next press the “−” button or the “↓” button to

select the LIST function. The printer starts to print a list of the currently selected options. The preselected factory settings, also called factory defaults, are shown on the opposite page.

When the printer finishes printing the list of options, it reprints the <<FUNCTION>> menu.

3.Do either of the following:

•Select another function, or

•Exit setup mode, saving any changes you made.

For details about other functions, see the other sections in this chapter. To exit setup mode and save your changes, make sure that the red cursor is positioned on SAVE & END, then press the −MICRO button or the ↓MICRO button.

5-10

User's Manual