Fujitsu DL9300, DL9400 Item, Option, Function, TO CHANGE, MENU1 and MENU2, MENU1 and MENU2, USING SETUP MODE, Items and Options, Items and Options, DECIDING WHICH OPTIONS

USING SETUP MODE

DECIDING WHICH OPTIONS	The previous page shows a printout of the printer’s factory default
TO CHANGE	settings. In this printout, options are listed by functional group:
		• Menu 1 settings (MENU1 function)
		• Menu 2 settings (MENU2 function)
		• Hardware settings (HARDWRE function)
		• Print position adjustment settings (ADJUST function)
		• Configuration settings (CONFIG function)
		• Print head gap adjustment settings (GAP-ADJ function)
	Most selectable options only alter print features, such as the typestyle,
	and page format. However, some options must be selected correctly
	for the printer to work properly with your hardware and software.
	For each function, Table 5.2 lists items whose options must be selected
	correctly for system and printer accessory compatibility.
			Table 5.2 Required Options
		Function	Item	Option
		MENU1	EMULATE	The emulation selected on the printer
				must be the same as the emulation
				selected in your software. If you selected
				an emulation when you set up the
				printer (Chapter 2), you do not need to
				change the EMULATE option unless you
				want to change to a different emulation.
				The emulation assigned to MENU1 is the
				default when you turn the printer on.
				See the section MENU1 and MENU2
				Items and Options later in this chapter.
		MENU2	None	If you use MENU2, the emulation
				selected for MENU 2 must be the same as
				the emulation selected in your software.
				See the section MENU1 and MENU2
				Items and Options later in this chapter.

5-12 User's Manual