Fujitsu DL9300, DL9400 Button, Action, Purpose, PAPER HANDLING, Table 3.1 Buttons Used for Paper Handling

PAPER HANDLING

Table 3.1 Buttons Used for Paper Handling

Button	Purpose	Action
ONLINE	Change the	Press ONLINE to place the printer online or offline.
	printer mode
	Stop/resume	Press ONLINE to stop or resume printing.
	printing
LOAD	Load/unload	Press LOAD to load paper or to retract continuous
	paper	forms to the “park position.”
	Save adjusted	Press LOAD and ONLINE to permanently store the
	load point	load position adjusted by micro feeding.
LF/FF	Form feed	Press and hold LF/FF to execute a form feed.
		Continuous forms are fed forward by one page.
		Single sheets are ejected.
	Line feed	Press LF/FF within three seconds to feed paper
		forward by one line.
TEAR OFF	Advance forms	Press TEAR OFF to advance the forms perforation to
	for tear-off	the tear-off edge. Tear off the forms, then press any
		button to retract remaining the forms.
PAPER	Selects paper	Press PAPER PATH to select the paper path: front
PATH	path	tractor, rear tractor, cut sheet.
MULTI	Set/reset multi	Press MULTI COPY to set or reset multi copy mode.
COPY	copy mode
FRONT	Select cut sheet	Select a direction of ejecting cut sheet.
DIR	ejection	• Front ejection – FRONT indicates
		• Rear ejection – FRONT does not indicate
		When you save your setting in the setup mode, it
		becomes the new default. The default setting is
		invoked whenever you turn on the printer.
−MICRO	Micro Feed	Press −MICRO/↓MICRO to feed paper by 1/180
↓MICRO		inch in the direction of the arrow.

Handling Paper

User's Manual 3-3