SETTING UP

3.Select the MENU1 function.

Locate the red cursor (two red lines) on the plastic print guide.

Initially, this cursor should be positioned on SAVE & END at the beginning of the <<FUNCTION>> menu. Press the ← or →

button repeatedly to position the cursor on MENU1, as shown below:

Print guide

Up Setting

Cursor (red lines)

Press the − button or the ↓ button to select MENU1 and print the following <EMULATE> options:

DPL24C+

XL24E

ESC/P2

<EMULATE>

 

 

 

 

The currently selected emulation is indicated by a short under- line. In the figure shown above, the Fujitsu DPL24C PLUS emulation is selected.

4.Select an emulation.

Press the ← or → button repeatedly to position the cursor under the required emulation. Press the − button to select the emula-

tion and print the next MENU1 item.

User's Manual

2-31