Fujitsu DL9300, DL9400 Purpose, Function, <<FUNCTION, USING SETUP MODE, OVERVIEW OF SETUP MODE, Table 5.1 Setup Mode Functions

USING SETUP MODE

The initial printout contains a header, help menu, and <<FUNC- TION>> menu. The header tells you that the printer is offline and in setup mode. The help menu provides a quick summary of how to use setup mode. The <<FUNCTION>> menu lists all of the functions available to you in setup mode. Note that the red cursor on the plastic print guide is initially positioned below the SAVE & END function.

Setup mode can also be entered by turning off the printer, then turning the printer back on while pressing the −MICRO and ↓MICRO buttons simultaneously until the printer beeps.

OVERVIEW OF SETUP MODE When you enter setup mode, the following <<FUNCTION>> menu is printed:

				<<FUNCTION>>
SAVE&END	MENU1	MENU2	HARDWRE	ADJUST CONFIG DEFAULT
LIST	SELF-TST	HEX-DUMP	V-ALMNT	GAP-ADJ

Table 5.1 summarizes the purpose of each function.

Table 5.1 Setup Mode Functions

Function	Purpose
SAVE & END	Exits setup mode and saves any changes made
	while in setup mode.
MENU1 and	Assigns print features to MENU1 and
MENU2	MENU2 on the printer control panel.
HARDWRE	Changes the printer hardware options.
ADJUST	Changes the print position adjustment options.
CONFIG	Changes the configuration options.
GAP-ADJ	Adjust the gap between the print head and
	printing paper.

5-4 User's Manual