Fujitsu DL9300, DL9400 B, C, D, Setting *2, PAPER HANDLING, Number of Copies, USING SINGLE SHEETS, (Including the Original) *1, Loading a Single Sheet of Paper

PAPER HANDLING

USING SINGLE SHEETS

Table 3.2 Paper Thickness Indicator Settings

Number of Copies	Setting *2
(Including the Original) *1
1 copy	1
2 copies	2
3 copies	3
4 copies	4
5 copies	5
6 copies	6
7 copies	7
8 copies	8
Envelops	A
Slips	B, C, D
Ribbon replacement	R

*1 For carbon-interleaved paper, the carbon counts as one copy.

*2 Vary the setting up or down (including A to R) to optimize printing. Select R when replacing a ribbon or clearing a paper jam. For labels and envelopes, use trial-and-error to determine a satisfactory setting.

This section describes how to load paper from the paper table or cut sheet feeder. The paper table allows paper to be loaded manually, one sheet at a time. A cut sheet feeder allows paper to be loaded automatically from the paper bin.

Handling Paper

Loading a Single Sheet of Paper

To load a sheet of paper from the paper table:

1.Make sure that the printer is turned on.

2.Press the PAPER PATH button to select CUT SHEET (the indicator lights).

3.Put the paper table in the nomal position (horizontal).

User's Manual 3-7