Fujitsu 5.2.10 Stop Zero Reclamation, 1

Chapter 5 Volume Management
5.2 Functions in the Action Area for Volume
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
140
2Click the [OK] button.
→Zero Reclamation starts.
3Click the [Done] button to return to the [Volume] screen.
End of procedure
5.2.10 Stop Zero Reclamation
This function stops Zero Reclamation.
The procedure to stop Zero Reclamation is as follows:
Procedure
1Select the volume to stop Zero Reclamation (multiple selections can be made), and click
[Stop Zero Reclamation] in [Action].
→A confirmation screen appears.
•Zero Reclamation cannot be suspended and restarted (restarting Zero Reclamation from where it was
stopped). If Zero Reclamation is stopped and then started again, the Zero Reclamation process starts
from the first volume at the top again.
•This function cannot release the volumes that are reserved for Zero Reclamation. The reservation status
of Zero Reclamation is released only when RAID migration is stopped.
•This function cannot be performed when the storage system status is "Not Ready".
The progress of Zero Reclamation can be checked with "Process" on the [Volume] screen. Refer to "5.1.1
Volume (Basic Information)" (page 74) for details.