Fujitsu 4, 9.2.3 CA Port Group Management

Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
516
3Click the [OK] button.
→Changing of the SAS host information starts.
4Click the [Done] button to return to the [SAS Host] screen.
End of procedure
9.2.3 CA Port Group Management
CA Port Group management provides the following functions:
•Create FC Port Group
•Create iSCSI Port Group
•Create SAS Port Group
•Create FCoE Port Group
•Delete CA Port Group
•Modify CA Port Group
•Modify FC Port Parameters
•Modify iSCSI Port Parameters
•Modify SAS Port Parameters
•Modify FCoE Port Parameters
•Modify Port Mode
An error screen appears in the following conditions:
•When the "Name" is not input
•When the "Name" does not satisfy the input conditions
•When the "Name" already exists
•When the "SAS Address" is not input
•When the "SAS Address" does not satisfy the input conditions
•When the same "SAS Address" is already registered
•When there are some LUNs that cannot be recognized from the SAS host because the "Host
Response" setting has been changed (only for SAS hosts that are not registered in a host group)