Fujitsu 11.2.3 Network Management

Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
745
11.2.3 Network Management
This section describes the network environment settings.
The following functions are available for the network environment settings:
•Setup Network Environment
•Setup Firewall
•Setup SNMP Agent Basic Interface
•Setup SNMP Manager
•Setup SNMP Agent MIB Access View
•Setup SNMP Agent User
•Setup SNMP Agent Community
•Setup SNMP Agent Trap
•Download MIB File
•Send SNMP Trap Test
•Display SMTP Log
•Setup E-Mail Notification
•Setup Syslog
•Setup SSH Server Key
•Create Self-signed SSL Certificate
•Create Key/CSR
•Register SSL Certificate
11.2.3.1 Setup Network Environment
This function sets up an the environment for the ETERNUS DX Disk storage system to communicate with an
external network.
The IP address, subnet mask (prefix length), gateway, DNS server of the ETERNUS DX Disk storage system, and
network address for the remote operation from outside of the subnet can be configured. Configuration is
required for each MNT, RMT and FST port.
•MNT port
The MNT port is used for general communication between the ETERNUS DX Disk storage system and the
external hosts.
•RMT port
The RMT port is used when the line must be separated from the MNT port.
•FST port
The FST port is used for maintaining the ETERNUS DX Disk storage system.