Fujitsu manual 1 2

Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
865
The procedure to add a user role is as follows:
Procedure
1Click [Add Role] in [Action].
2Input the role name, select the policies for the role, and click the [Create] button.
●Role Setting
•Name
Input a role name.
The role name, which has previously been used (including the default role name), cannot be used.
The following input condition applies:
-Up to 16 alphanumeric characters and symbols (except ", (comma)" and "?")
●Target Poli cy
•Policies
Select the policies that are to be allocated to the user roles.
-Status Display
-RAID Group Management
-Volume - Create / Modify
-Volume - Delete / Format
-Host Interface Management
-Advanced Copy Management
-Copy Session Management
-Storage Migration Management
-Storage Management
-User Management
-Authentication / Role
-Security Setting
-Maintenance Information
-Maintenance Operation
•The ETERNUS DX Disk storage system has default roles. Refer to "Default Role" (page 948) for details.
•Multiple policies can be allocated to one role.
•A role that is created can be allocated to a user account by using the procedure in "11.2.7.1 Setup User
Account" (page 853).