Fujitsu manual 1, 2

Chapter 11 System Management
11.2 Functions in the Action Area for System
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
828
11.2.5.4 Test Server Connectivity
This function checks the connection status between the ETERNUS DX80 S2/DX90 S2, the ETERNUS DX410 S2/
DX440 S2, or the ETERNUS DX8100 S2/DX8700 S2, and a remote server (AIS Connect server).
The procedure to check the connection status between the ETERNUS DX Disk storage system and the AIS Con-
nect server is as follows:
Procedure
1Click [Test Server Connectivity] in [Action].
→A confirmation screen appears.
2Click the [OK] button.
→Checking of the server connection status starts.
3Click the [Done] button to return to the screen when starting this function in Step 1.
End of procedure
Checking the connection status is only available when "AIS Connect" is enabled. Refer to "11.2.5.1 Setup AIS
Connect Environment" (page 821) for details.
This function checks the connection status of the AIS Connect server by using the AIS Connect information in
the ETERNUS DX Disk storage system. After using the [Setup AIS Connect Environment] function, use the [Test
Server Connectivity] function to check the connection status.
The check result of the server connection status is displayed in the [Test Server Connectivity Result]
screen. If server connection fails, the cause of the error is displayed.