Fujitsu manual 4, 1

Chapter 9 Connectivity Management
9.2 Functions in the Action Area for Connectivity
ETERNUS Web GUI User’s Guide
Copyright 2013 FUJITSU LIMITED P2X0-1090-10ENZ0
588
3Click the [OK] button.
→Addition of the host response starts.
4Click the [Done] button to return to the [Host Response] screen.
End of procedure
9.2.5.2 Delete Host Response
This function deletes a host response.
The procedure to delete a host response is as follows:
Procedure
1Select the host response to be deleted (multiple selections can be made) and click [Delete
Host Response] in [Action].
→A confirmation screen appears.
An error screen appears in the following conditions:
•When the "Name" matches with an existing host response name
•When the total number of host responses has exceeded the maximum number of host responses
for the ETERNUS DX Disk storage system
•When deleting an active host response, stop the access from the host group which the host response has
been assigned to.
•If an active host response is deleted, the host response setting will return to the initial state.
•The recommended pattern of the host response cannot be changed and deleted.