D.2.3.5 Simplified DTC

-M3096G: If the threshold value in the Set window parameter is 0, the Simplified DTC function is operable. However, this is available only if the IPC option has been installed. This function allows specification of the Variance rate.

-M3097G: If the threshold value in the Set window parameter is 0 and the value of the DTC SELECTION byte is specified as a number between X￿00© or X￿80￿, the Simplified DTC function is operable.However, this is available only if the IPC II option has been installed. This function allows specification of the Variance rate.

D $ 14