fDTC mode: byte 30
X©20 is set when the power is turned on.
This byte is valid when the IPC ¬ is installed, and byte 3E is X©40
MSBLSB
7 6 5 4 3 2 1 0
0 | 0 |
|
|
|
|
|
| (Dynamic threshold mode setting) |
|
|
|
|
|
|
|
|
|
Binary data when the threshold equals video data to be binary>coded. (*1)
0 : Output binary data is ™1 (Black)
1 : Output binary data is ™0 (White)
Noise removing of 2¥2 matrix
0 : OFF
1 : ON
Noise removing of 3¥3 matrix
0 : OFF
1 : ON
Noise removing of 4¥4 matrix
0 : OFF
1 : ON
Noise removing of 5¥5 matrix
0 : OFF
1 : ON
Enables the noise removing bits (bits 1>4 when this bit is active).
0 : ON
1 : OFF
*1 When this bit is ™0, the output video data is black if the gradation of the video data is equal to or larger than threshold. When this bit is ™1, the output video data is white if the gradation of the video data is equal to or larger than threshold.
4 $ 52