SCSI ID: 0 to 7, variable by EEPROM: default is 5.
Logical unit number (LUN): 000, fixed
(2)Bus phases
All phases are supported.
(3)Commands
The following commands are supported by this scanner:
f INQUIRY
f OBJECT POSITION f MODE SELECT
f MODE SENSE f READ
f RELEASE UNIT f REQUEST SENSE f RESERVE UNIT f SEND
f SEND DIAGNOSTIC f SET SUBWINDOW f SET WINDOW
f TEST UNIT READY
A control byte is not supported. If the value other than X©00 is specified, an error is generated.
(4)Statuses
The following statuses are supported by this scanner:
f BUSY
f CHECK CONDITION f GOOD
f RESERVATION CONFLICT
4 $ 2