(k) Halftone Pattern: Byte 1C
Value (Hex) | Halftone pattern |
|
|
00 | Dither pattern 0 |
|
|
01 | Dither pattern 1 |
|
|
02 | Dither pattern 2 |
|
|
03 | Dither pattern 3 |
|
|
04 to 7F | (Reserved) |
|
|
80 to 84 | User down>load pattern |
|
|
85 to FF | (Reserved) |
|
|
If reserved value is specified, this scanner returns the following error information as follows:
f Status: | B©00001 (CHECK CONDITION) |
fSense key: X©5 (ILLEGAL REQUEST)
(l)RIF (reverse image format) : Byte 1D, bit 7
This bit is used when the binary image data output is being reversed.
0:Output is not reversed
1:Output is reversed
If a 1 is specified for this scanner without the image processing II option, this scanner returns the following error information:
f Status: | B©00001 (CHECK CONDITION) |
f Sense key: X©5 (ILLEGAL REQUEST)
(m)Padding type: Byte 1D, bits 0 to 2
This scanner does not support Padding type. If a value other than B©000 is specified, this scanner returns following error information:
f Status: | B©00001 (CHECK CONDITION) |
f Sense key: X©5 (ILLEGAL REQUEST)
(n)Bit ordering: Bytes 1E to 1F
This scanner does not support bit ordering. If a value other than X©0000 is specified, this scanner returns the following error information:
f Status: | B©00001 (CHECK CONDITION) |
fSense key: X©5 (ILLEGAL REQUEST)
4 $ 45