Notes:
1.If the ADF is used and this parameter has not been specified, the paper is scanned on the default paper size (A3) of this scanner.
2.The paper size specified here concerns the sheets loaded in the ADF.
The area specified by the WINDOW bytes 6 to 15 in the window data should be equal to or smaller than the specified paper size.
3.The ADF for this scanner positions paper relative to the center.
Therefore, if paper size is not specified in the window data bytes 6 to 15, the window cannot be accurately positioned for the paper.
4.This parameter is only effective for reading with the ADF.
fDTC SELECTION: byte 3E
DTC SELECTION BYTE
Byte 3E | b7 | b6 | b5 | b4 | b3 | b2 | b1 | b0 |
|
|
|
|
|
|
|
|
|
Reserved
Reserved
DTC SELECTION
00:Default; Simplified DTC, if IPC II optioned.
01:Dynamic threshold
10:Simplified DTC, if IPC II optioned.
11:Reserved
If reserved value is specified, this scanner returns the following error information as follows:
f Status: | B©00001 (CHECK CONDITION) |
fSense key: X©5 (ILLEGAL REQUEST)
Note:
If simplified dynamic threshold is selected. (Byte 3E=X'00' or X'80'), variance rate (byte 2E) is valid.
If dynamic threshold is selected (byte 3E=X'40'), DTC mode (byte 2F and 30) are valid.
4 $ 55