(k)Vender unique parameter: byte 28 and after
Specifies, in byte 28 and after, a vender unique identification parameter, including items such as outline, emphasis, and automatic separation, as required. This parameter is specified in the following format. This parameter does not need data until byte 3E. (It is unnecessary to transfer the unnecessary parameter but the intermediate parameter cannot be omitted.
28 | Vender unique identification code | |
29 | d Pattern number | |
2A |
| |
Outline extraction | ||
2B |
| |
Image emphasis | ||
2C |
| |
Automatic separation | ||
2D |
| |
Reserved | ||
2E |
| |
Variance rate | ||
2F | ||
| ||
30 |
| |
31 |
| |
32 |
| |
33 |
| |
34 |
| |
35 |
| |
36 | Reserved | |
37 |
| |
38 |
| |
39 |
| |
3A |
| |
3B |
| |
3C |
| |
3D |
| |
|
| |
3E | DTC selection | |
fVender unique identification code: byte 28
Specifies a vender unique identification code. For this scanner, X©00 must be specified. If other value is specified, this scanner returns the following error information:
f Status: | 00001 (CHECK CONDITION) |
fSense key: X©5 (ILLEGAL REQUEST)
fd pattern: byte 29
Specifies d pattern number for subwindow. For details, see the explanation of the SET WINDOW command.
fOutline extraction: byte 2A
Specifies the outlining for the subwindow. For details, see the explanation of the SET WINDOW command.
4 $ 62