a.Transfer data type: Byte 2
Specifies the type of data to be transferred between the initiator and target. This scanner supports X©02 (dither pattern) and X©03 (d pattern). If any other value is specified, this scanner returns the following error information:
f Status: B©00001 (CHECK CONDITION)
f Sense key: X©5 (ILLEGAL REQUEST)
b.Transfer identification: Byte 4 to 5
Identifies each data. On this scanner, this field is used to differentiate with a value from 0 to 4 downloadable dither patterns. If a value 5 or larger is specified, this scanner returns the following error information:
f Status: B©00001 (CHECK CONDITION)
f Sense key: X©5 (ILLEGAL REQUEST)
c.Transfer length (TL) : Bytes 6 to 8
Specifies the bytes of data to be transferred by the initiator.
If TL = 0, no data is transferred. This is not regarded as an error.
If TL > 1034 (larger than a dither pattern of 32 ¥ 32), this scanner returns the following error information:
f Status: B©00001 (CHECK CONDITION)
f Sense key: X©5 (ILLEGAL REQUEST)
4 $ 69