Fujitsu MHV2060AS, MHV2080AS, MHV2040AS manual Host Commands

	5.3 Host Commands
Bit 12:	Reserved
Bit 11:	'1' = Device asserts PDIAG-.
Bit 10, 9:	Method for deciding the device No. of Device 1.
	'00' = Reserved
	'01' = Using a jumper.
	'10' = Using the CSEL signal.
	'11' = Other method.
Bit 8:	= '1' (In the case of device 1)
Bits 7-0: In the case of Device 0 (master drive), a valid value is set.
Bit 7:	Reserved
Bit 6:	'1' = Device 1 is selected, Device 0 responds.
Bit 5:	'1' = Device 0, assertion of DASP- was detected.
Bit 4:	'1' = Device 0, assertion of PDIAG- was detected.
Bit 3:	'1' = Device 0, an error was not detected in the self-
	diagnosis.
Bit 2, 1:	Method for deciding the device No. of Device 0.
	'00' = Reserved
	'01' = Using a jumper.
	'10' = Using the CSEL signal.
	'11' = Other method.
Bit 0:	'1'= (In the case of device 0)

*21 WORD 94

Bit 15-8: X'FE' Recommended acoustic management value.

Bit 7-0: X'XX' Current set value.

FE-C0: Performance mode

BF-80: Acoustic mode

00:Acoustic management is unused it. (It is same as "FE-CO")

*22 WORD 100-103

When "48 bit LBA" of the option (customize) is supported, same number of LBA as WORD 60-61 is displayed.

C141-E221 5-87