Internal LAN (RJ-45) Jack

The internal LAN (RJ-45) jack is used for a Gigabit (10Base-T/100Base-Tx/1000Base-T) Ethernet LAN connection. You may need to configure your notebook to work with your particular network. (Please refer to your network administrator for information on your network configuration.) To connect the LAN cable follow these easy steps:

1Align the connector with the port

opening.

2 Push the connector into the port until it is seated.

3 Plug the other end of the cable into a LAN outlet.

Figure 34. Connecting LAN Device

Universal Serial Bus Ports

The Universal Serial Bus 2.0 ports (USB) allow you to connect USB devices such as external game pads, pointing devices, keyboards and/or speakers. There are three USB 2.0 ports on the right side of your notebook.

In order to connect a USB device follow these steps:

1Align the connector with the port openin, then push the connector into the port until it is seated.

DUE TO THE ONGOING CHANGES IN USB TECHNOLOGY AND STANDARDS, NOT ALL USB DEVICES AND/OR DRIVERS ARE GUARANTEED TO WORK.

89 - Device Ports

Page 94
Image 94
Fujitsu S6510 manual Internal LAN RJ-45 Jack, Universal Serial Bus Ports