Fujitsu S6510 manual Microphone/Line-In Jack, External Video Port

Models: S6510

1 203
Download 203 pages 60.06 Kb
Page 96
Image 96

Microphone/Line-In Jack

The microphone/line-in jack allows you to connect an external mono microphone. Your microphone must be equipped with a 1/8”(3.5 mm) mono mini-plug in order to fit into the microphone jack of your notebook. In order to connect a microphone follow these easy steps:

1Align the connector with the port opening.

2Push the connector into the port until it is seated

External Video Port

The external video port allows you to connect an external monitor or LCD projector. In order to connect an external video device, follow these easy steps:

1 Align the connector with the port opening.

2 Push the connector into the port until it is seated.

3 Tighten the two hold-down screws, located on each end of the connector.

Figure 36. Connecting an External Video Device

PRESSING THE [FN] + [F10] KEYS ALLOWS YOU TO CHANGE YOUR SELECTION OF WHERE TO SEND YOUR DISPLAY VIDEO. EACH TIME YOU PRESS THE KEY COMBINATION, YOU WILL STEP TO THE NEXT CHOICE, STARTING WITH THE BUILT-IN DISPLAY PANEL ONLY, MOVING TO THE EXTERNAL MONITOR ONLY, FINALLY MOVING TO BOTH THE BUILT-IN DISPLAY PANEL AND AN EXTERNAL MONITOR.

91 - Device Ports

Page 96
Image 96
Fujitsu S6510 manual Microphone/Line-In Jack, External Video Port