Calibrating the Touch Screen

In order to ensure accurate tracking between the stylus and cursor, you should run the Touch Screen Calibration Utility before you use the touch screen for the first time, or after you change the display resolution.

Depending upon your operating system, the steps vary slightly, as noted below:

Microsoft Windows XP Professional Edition

To run the calibration utility:

1Go to [Start] -> Control Panel, and double-click on the Tablet and Pen Settings icon.

2Select the Settings tab and click the [Calibrate...] button.

3Adjust the display of your notebook to the angle at which you usually work, and follow the calibration instructions on the screen.

4When you have finished calibrating the screen, reboot your system.

Microsoft Windows Vista/Tablet PC Edition

1Go to Start -> Control Panel and double-click on the Tablet Calibration icon.

2Adjust the display of your notebook to the angle at which you usually work, and follow the calibration instructions on the screen.

3When you have finished calibrating the screen, reboot your system.

34 - Touch Screen

Page 39
Image 39
Fujitsu Siemens Computers B6230 notebook manual Calibrating the Touch Screen, Microsoft Windows XP Professional Edition