Problem

Possible Cause

Possible Solutions

 

 

 

 

 

 

System powers up and dis-

You have a secured

Make sure you have the right password. Enter the setup utility and

plays power on information

system requiring a

verify the Security settings and modify them as accordingly. See

but fails to load the operat-

password to load your

“BIOS Setup Utility” on page 52.

ing system. (continued)

operating system.

 

 

 

 

An error message is dis-

Power On Self Test

See the Power On Self Test (POST) messages to determine the

played on the screen during

(POST) has detected a

meaning and severity of the problem. Not all messages are errors;

the notebook (boot)

problem.

some are simply status indicators. See “Power On Self Test Mes-

sequence.

 

sages” on page 92.

 

 

 

Your notebook appears to

BIOS setup changes

Make sure you select Save Changes And Exit when exiting the

change setup parameters

were not saved when

BIOS setup utility.

when you start it.

made and you exited

 

 

the setup utility.

 

 

 

 

Your system display won’t

You have installed the

Check the Status Indicator Panel for presence of the Security icon.

turn on when the system is

LifeBook/Security Appli-

If it is visible, enter your password See “Status Indicator Panel” on

turned on or has resumed.

cation panel.

page 21.

 

 

 

Video Problems

 

 

 

 

 

The built-in display is blank

The notebook is set for

Press [F10] while holding down the [Fn] key to change where to

when you turn on your Life-

an external monitor

send your display video. When you press the keys you will step to

Book notebook.

only.

the next choice. The choices, in order are: built-in display only,

 

 

external monitor only, both built-in display and external monitor.

 

 

 

 

The display angle and

Move the display and the brightness control until you have ade-

 

brightness settings are

quate visibility. Pressing either the [F6] or [F7] keys while holding

 

not adequate for your

down the [Fn] key also allows you to change the brightness level

 

lighting conditions.

of the display.

 

 

 

 

The power manage-

Press a keyboard button or move the mouse to restore operation.

 

ment timeouts may be

If that fails, push the Suspend/Resume button. (The display may

 

set for very short inter-

be shut off by Sleep mode, Auto Suspend or Video Timeout)

 

vals and you failed to

 

 

notice the display come

 

 

on and go off again.

 

 

 

 

89 - Troubleshooting

Page 94
Image 94
Fujitsu Siemens Computers B6230 notebook manual Video Problems