
INITIAL SETUP (SETUP WIZARD)
9Select “AUTOSCAN” using [K / L], then press [OK].
The system is now scanning
AUTOSCAN will rescan all channels.
This may take a while to complete.
EXIT | 12% | Channel Found |
AUTOSCAN
EXIT
•STB starts receiving available digital channels and stores them in the channel map.
•When the scanning is complete,
“AUTOSCAN COMPLETED” will be indicated.
•After autoscan is complete, press [CH /
] to verify whether STB is receiving channels properly.
The “SETUP WIZARD” is now complete.
To cancel during scanning:
Press [OK].
NOTE:
•If autoscan is canceled, some channels not yet scanned may not be received. We recommend completing autoscan.
14
EN
X6040UD_Book.indb 14 | 10/22/2007 5:09:14 PM |