Furuno FSV-30S installation manual Hull Unit Check, Main menu, Others menu

3. ADJUSTMENT AND CHECK

3.1 Hull Unit Check

Note: Before conducting this check (at the dry dock) transmission must be stopped. Default setting of TX power is OFF. Confirm that transmission is off as follows:

1. Turn on the power, and then press the [MENU] key to show the main menu.

MENU

QUIT

TX PULSE LENGTH-H	: 9
TX POWER-H	: 9
TVG-NEAR-H	: 0
TVG-MEDIUM-H	: 0
TVG-FAR-H	: 0
AGC-H	: 0
2ND AGC-H	: 0
ECHO AVERAGE-H	: 0
COLOR-H	: COLOR 1
COLOR RESPONSE-H	: COLOR CURVE 3

H-SCAN SETTING...

V-SCAN SETTING...

OTHERS...

Main menu

2. Use the trackball to choose OTHERS and press the [MENU] key.

MENU	QUIT
OTHERS	QUIT

ES1 SETTING...

ES2 SETTING...

ERASE MARKS...

DISPLAY SETTING...

ALARM & AUDIO...

PRESET, MEMORY CARD...

INITIAL SETTING...

OTHERS menu

3-1