TRACKBALL SPEED
Choose the speed of trackball movement (inside menu window only). (SLOW, NORMAL, FAST)
HULL UNIT STROKE
Choose the stroke length of the hull unit. (1200 mm, 1600 mm).
3.5 CONE Board Setting in the Processor Unit
Adjust the potentiometers on the CONE Board in the processor unit, referring to the table shown below.
Location | Name | Resistance | Function |
No. |
| value |
|
R118 | ALARM | 10 kΩ | Adjust the volume of audio |
|
|
| alarm. |
R119 | ES2_OFF | 1 kΩ | Adjust ES2 signal offset. |
|
|
|
|
R167 | ES2_GAIN | 10 kΩ | Adjust ES2 signal gain. |
|
|
|
|
R168 | ES1_OFF | 1 kΩ | Adjust ES1 signal offset. |
|
|
|
|
R209 | ES1_GAIN | 10 kΩ | Adjust ES1 signal gain. |
|
|
|
|
Adjustment
CW: Large
CCW: Small
CW: Noise decrease
CCW: Noise increase
CW: Gain increase
CCW: Gain decrease
CW: Noise decrease
CCW: Noise increase
CW: Gain increase
CCW: Gain decrease
3.5.1 Adjustment of signal level (echo sounder connected)
Adjusts the output level of the echo sounder on the CONE Board as below.
1.Choose an echo sounder display (ES1 or ES2) from the menu.
2.For ES1, adjust R168 to suppress noise, and then adjust R209 so that the picture condition is similar to that of connected echo sounder connected to the
3.For ES 2, adjust R119 to suppress noise, and then adjust R167 so that the picture condition is similar to that of echo sounder connected to the
3.5.2 Adjusting the volume of the audio alarm
The volume of the audio alarm cannot be adjusted from the control unit. If necessary, adjust R118 on the CONE Board to choose appropriate volume.
