Furuno SC-120 manual Flush mounting, Flush mount F, Name Type, Flush mount S

2. INSTALLATION

2.4.2Flush mounting

Two types of flush mounts are available. See the outline drawing at the back of the manual for details.

Flush mount “F”
Flush mount “F” kit		Type: OP20-29, Code No: 000-041-405)
	Name		Type	Code No.	Qty
	Cosmetic Panel		20-016-1051	100-251-370	1
	Tapping Screw		5X20	000-802-840	4
	Hex Bolt		M6X12	000-862-127	2
	Spring Washer		M6	000-864-260	2

1.Make a cutout in mounting location. The dimensions are 183(W) x 92(H) mm.

2.Fasten the cosmetic panel to the display unit with hex bolts and flat washers.

3.Fasten the display unit to the mounting location with tapping screws.

Flush mount “S”
Flush mount “S” kit	Type: OP20-17, Code No.: 000-040-720)
Name		Type	Code No.	Qty
Flush Mount Fixture		20-007-2401	100-183-190	2
Wing Bolt		M4X30	000-804-799	4
Wing Nut		M4	000-863-306	4
Hex Bolt		M6X12	000-862-127	2
Spring Washer		M6	000-864-260	2

1.Make a cutout in the mounting location. The dimensions are 167(W) x 92(H) mm.

2.Place the display unit in the cutout.

3.Fix the display unit to the two flush mount fixtures with hex bolts and spring washers.

4.Screw the wing nut on the wing bolt.

5.Fix the display unit with the wing bolt and then tighten the wing nut.

Flush mount “S”

2-15