Furuno SC-120 manual Installation on the underside of a desk

2. INSTALLATION

The unit can be oriented as shown in the figure below. After the unit is installed you will specify the mounting method from the menu.

Reference Direction

Bulkhead

Mount processor unit so

±reference direction is within

2.5° of fore-and-aft line.

Name Plate (other side)

Direction	Mounting Method: "Wall"
A	(Bulkhead)
	Mounting Direction: A

Direction D

Mounting Method: "Wall"

(Bulkhead)

Mounting Direction: D

	Direction B
	Mounting Method: "Wall"
	(Bulkhead)
Direction	Mounting Direction: B
C	Mounting Method: "Wall"
	(Bulkhead)
	Mounting Direction: C

Processor unit orientation, bulkhead mounting

7.Fasten the ground wire between the ground terminal on the processor unit and the ship’s superstructure.

2.3.3Installation on the underside of a desk

The processor unit may be mounted on the underside of a desk as shown in the figure below. Do not install it on the overhead.

Desk

Name Plate

Installation of processor unit on the underside of a desk

2-12