Furuno SC-120 manual Talker identifier mnemonics, Log pulse rate selection window

3. OPERATION

3.8.4Log pulse

This equipment provides SOG (speed over ground) in high accuracy. It converts an SOG value to a closure signal and outputs at the rate of 200 or 400 pulses/nm.

1.Press the [MENU] key.

2.Choose I/O SETUP and press the [ENT] key.

3.Choose LOG PULSE and press the [ENT] key.

200p/nm

400p/nm

Log pulse rate selection window

4.Choose 200 p/nm or 400 p/nm as appropriate and press the [ENT] key.

5.Press the [DISP] key to close the menu.

3.8.5Talker identifier mnemonics

Choose the heading talker ID for the output data sentence HDT and HDM as follows:

1.Press the [MENU] key.

2.Choose I/O SETUP and press the [ENT] key.

3.Choose HDG TALKER and press the [ENT] key.

GP

HE

HN

HC

Heading talker selection window

4.Choose GP, HE, HN or HC as appropriate and press the [ENT] key. Choose GP normally. If an external gyrocompass is to be used, choose HC.

GP: GPS Navigator

HE: North-seeking gyrocompass

HN: Non-north seeking gyrocompass

HC: Gyrocompass

5.Press the [DISP] key to close the menu.

3-10