Furuno SC-120 manual Program Number, Clearing Data, Program version no. display

4. MAINTENANCE, TROUBLESHOOTING

4.4Program Number

You may display the program number as follows:

1.Press the [MENU] key to open the menu.

2.Choose SOFT VER. and press the [ENT] key.

SOFTWARE VERSION

DISPLAY 205-1312-0**

PROCESS 205-1311-0**

GPS1 205-1313-0**

GPS2 205-1313-0**

GPS3 205-1313-0**

DGPS* 085-0182-0**

*= Blank if no DGPS receiver is connected.

**= Program version no.

Program version no. display

3. Press the [DISP] key to close the program version no. display.

4.5Clearing Data

You may clear GPS data and system data all at once or individually as follows:

1.Press the [MENU] key to open the menu.

2.Choose ERASE and press the [ENT] key.

3.Choose GPS DATA, SYSTEM DATA or ALL BACKUP DATA (clears GPS and

SYSTEM data) as appropriate. One of the following displays appears

depending on yourERASEAREselectionYESYOUGPSSURE?DATA?NO. ￿ ERSEDAYESRETA?ALLYOU(DEFAULT)BCKUPNOSURE?￿

ERASESYSTEM￿

DATA?YSREYOU(DEFAULT)SURENO?

Prompts for erasure of data

4.Press ◄ to choose YES and press the [ENT] key to erase. After data is erased the message “Completed erasing. Turn off the unit.” Is displayed.

Note: MOUNTING, DIRECTION and LANGUAGE in the INST menu, HDG RESTORATION and HDG BACKUP in the ALARMS menu, STATION in the DPGS menu and OFFSET in the HEADING SETUP menu are not cleared.

5. Turn off and on the power.

4-5