![](/images/new-backgrounds/1302430/30243041x1.webp)
3.2.2Com User Frequencies
Fifteen Com User Frequencies can be saved with an assigned waypoint (WPT) identifier and Type.
NOTE: When switching from 8.33 kHz to 25 kHz mode, any 8.33 kHz- specific user frequencies will be deleted from the user frequency list. This only affects the user frequencies within the 8.33 kHz spectrum.
3.2.2.1Viewing the Com User Frequency
1.Press FUNC to access the Functions. Turn the LARGE knob to select the Com Frequency Function.
Selected Frequency
Select Wpt Name
Select Wpt Type
Figure 3-3 Viewing User Com Frequencies
2.Turn the SMALL knob to view the Com User frequency function. Then, press ENT. Turn the SMALL knob to view the User Frequencies.
3.Press and release the FLIP/FLOP key to set the displayed frequency as the Active frequency.
4.Press the ENT key to set the displayed frequency as the Standby frequency.
3.2.2.2Deleting the Com User Frequency
1.Press the CLR key to delete this User frequency.
Press ENT Key To Delete
Selected Freq
Active Frequency |
|
|
|
| Position In List. |
|
|
| |||
|
|
|
|
| Turn SMALL Knob |
|
|
|
|
| |
|
|
|
|
| To Select Entry. |
|
| Selected Frequency |
| |
Press ENT To Confirm |
| |||
Deleting The Selected Freq |
| |||
| Figure | Deleting User Com Frequencies |
| |
| Garmin GTR 225/225A/225B Pilot’s Guide |